Brass Labels

(Caution tank may contain hazardous materials and/or vapors. To avoid explosion, fire, or inhalation of materials and/or vapors, do not remove lid or enter tank until appropriate precautionary steps have been taken to ensure the safety of yourself and others.)

(Tank has integral steel foundation and is for stationary use only. Lift or transport only when empty.)

(This tank requires emergency relief venting, capacity not less than ______ CU. FT. per HR.)

(Manhole is provided with long bolts to permit emergency relief venting. Do not replace with shorter bolts.)

(Keep space between outer tank and inner tank vented to atmosphere.)

(Interior tank must be pressurized to 5 P.S.I.G. while pressure testing exterior tank.)

(This tank requires emergency relief veting capacity not less than ____ CU. FT. Per HR. (inner tank) and ____ CU. FT. per HR (annular space))

(Tank has integral steel foundation, and is for stationary use only. Lift or transport only when empty. This tank requires emergency relief venting. Capacity not less than _____ CU. FT. per HR.)

(Keep space between outer wrap and inner tank vented to atmosphere. Loose fitting thread protectors may be used during transit.)

(This tank requires emergency relief venting. Capacity not less than ____ CU. FT. per HR. Tank is intended for stationary installation only.)

(The annular space requires emergency relief venting. Capacity not lass than ____ CU. FT. per HR. Pressurize primary tank when pressure testing annular space.)

(This tank intended for stationary use only. Dike capacity 110% of primary tank volume.)

(Slope installation with monitoring access end of tank at lowest point.)

(If this tank is a single-wall tank, steel is min. ____ Ga. If this tank is double-wall, the outer tank's steel is min. ____ Ga.)

(Capacity __________ Gallons

 Empty Weight ___________)